| HP Rating: | 1/3 |
| Input Voltage (VAC 50/60 Hz): | 115 |
| Output Voltage (VDC): | 0-130 |
| Continuous Output Current (Amps): | 2.3 |
| Peak Output Current (Amps): | 4.6 |
| Form Factor: | 1.0 |
| Product Type: | FPM-0855E |
| HPDecimal: | 0.3333 |
| Weight: | 8 |
STANDARD FEATURES
- Operates off 115 Volt AC line, 50/60 Hz.
- Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range.
- Dip switches to easily calibrate control for different motor sizes.
- Line voltage and temperature compensation minimizes speed drift.
- NEMA 12 enclosure for environmental protection.
- Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, and speed regulation.
- Speed can be adjusted manually using speed pot mounted on enclosure.
- Terminal block inside enclosure for quick line and motor connection.
- Back EMF feedback maintains better than 2% speed regulation.
- Fuse holders for line and motor inside enclosure (both fuses supplied).
- Toggle switch on enclosure to turn AC power on/off.
- Lamp on enclosure indicates AC power on.
Application Information
- Extended 2-year system warranty when a Bodine gearmotor/motor and control are purchased together.
- Rated for continuous operation in 40° ambient with no additional heat sink.
- Drives Bodine 130V Permanent Magnet DC Motors.
- Drives 90V "SCR duty" and 130V "PWM duty" permanent magnet DC motors made by other manufacturers.
