|Input Voltage (VAC 50/60 Hz):||115|
|Output Voltage (VDC):||0-130|
|Continuous Output Current (Amps):||0.50|
|Peak Output Current (Amps):||1|
- Operates off 115 Volt AC line.
- Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range.
- Dip switches to easily calibrate control for different motor sizes.
- Line voltage and temperature compensation minimize speed drift.
- Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, and speed regulation.
- Back EMF feedback maintains better than 2% speed regulation.
- 10k ohm remote speed pot and 24" connecting wire supplied with each control.
- Connections for optional user-supplied inhibit switch.
- Terminal block for quick line and motor connection.
- Plug-in connector for speed pot and optional usersupplied inhibit switch.
- Flexibility in adding plug-in interface boards. See optional accessories.
- Built-in line and motor fuseholders (both fuses supplied).
- Extended 2-year system warranty when a Bodine gearmotor/motor and control are purchased together.
- Rated for continuous operation in 50° C ambient with no additional heat sink.
- Designed to be mounted in separate enclosure supplied by user.
- Drives Bodine 130 Volt permanent magnet DC motors.
- Drives 90 Volt "SCR duty" and 130 Volt "PWM duty" permanent magnet DC motors made by other manufacturers.