| HP Rating: | 1/5 |
| Input Voltage (VAC 50/60 Hz): | 115 |
| Output Voltage (VDC): | 0-90 |
| Continuous Output Current (Amps): | 2.1 |
| Peak Output Current (Amps): | 4.2 |
| Form Factor: | 1.6 |
| Product Type: | UPM-3318E1 |
| HPDecimal: | 0.2 |
| Weight: | 3 |
STANDARD FEATURES
- Operates from 115 Volt AC line.
- Line voltage compensation minimizes speed drift.
- NEMA 1 enclosure for environmental protection.
- Back EMF feedback maintains better than 2% speed regulation.
- Dip switches to easily calibrate control for different motor sizes.
- Two diagnostic LEDs indicate when power is on and when current output is at limit set by TORQ pot.
- Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, deceleration time, and speed regulation.
- Speed can be adjusted manually using speed pot mounted on enclosure.
- Terminal block inside enclosure for quick motor connection.
- Fuse holder for line on front panel.
- Toggle switch on enclosure to turn AC power on/off.
- Lamp on enclosure indicates AC power on.
- Factory installed AC line cord.
- Unfiltered drive draws lower AC line current than comparable SCR filtered controls.
- Connections for optional user-supplied inhibit switch.
Application Information
- Extended 2-year system warranty when a Bodine gearmotor/motor and control are purchased together.
- Rated for continuous operation in 40° ambient with no additional heat sink.
- Drives Bodine 130V Permanent Magnet DC Motors.
- Drives 90V "SCR duty" and 130V "PWM duty" permanent magnet DC motors made by other manufacturers.