| Speed (rpm): | 288 |
| Rated Torque (Nm): | 0.44 |
| Rated Torque (lb-in): | 4 |
| Peak Torque (Nm): | 1.9 |
| Peak Torque (lb-in): | 17 |
| Power (Watts): | 23 |
| Power (HP): | 1/32 |
| Volts: | 180 |
| Amps: | 0.18 |
| Gear Ratio: | 6 |
| Radical Load (N): | 450 |
| Radial Load (lbs): | 100 |
| Length XH (mm): | 176 |
| Length XH (inch): | 6.92 |
| Weight (kg): | 2.3 |
| Weight (lbs): | 8 |
| Connection Diagram: | 07410097 |
| Product Type: | 24A4BEPM-Z2 |
| HP Decimal: | 0.0312 |
| Relates Products: | 0865;0866;1865 |
STANDARD FEATURES
- Metric mounting threads and metric drive shaft dimensions.
- 24A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating conditions.
- Unvented gearhousing.
- Industrial lip type seals on motor and output shafts.
- Needle bearing on output shaft for increased radial load capacity and long life.
- Permanently lubricated gearing utilizing oil for long life.
- Wide reinforced thermoplastic helical gear on input stage for quietness and wide hardened steel spur gears on subsequent stages for high output torque and long life.
- Helical pinion accurately cut on motor shaft for maximum strength and minimum noise.
- Noise-tested ball bearings permanently lubricated.
- Locked bearing minimizes endplay.
- Performance ratings of 180V models are based on use with an unfiltered SCR speed control (Form Factor = 1.6).
