| Speed (rpm): | 417 |
| Rated Torque (lb-in): | 6 |
| Rated Voltage: | 180 VDC |
| Amps (130V Model): | 0.30 |
| Peak Torque (lb-in): | 20 |
| Motor HP: | 1/19 |
| Gear Ratio: | 6 |
| Radial Load (lbs): | 147 |
| Length XH (inch): | 6.890 |
| Weight (lbs): | 5 |
| Product Type: | 24A4BEPM-Z2 |
| Accessory Shaft: | NO |
| HP Decimal: | 0.05 |
| Connection Diagram: | 07410101 |
STANDARD FEATURES
- 24A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating conditions.
- Unvented gearhousing.
- Industrial lip type seals on motor and output shafts.
- Needle bearing on output shaft for increased radial load capacity and long life.
- Permanently lubricated gearing utilizing oil for long life.
- Wide reinforced thermoplastic helical gear on input stage for quietness and wide hardened steel spur gears on subsequent stages for high output torque and long life.
- Helical pinion accurately cut on motor shaft for maximum strength and minimum noise.
- Noise-tested ball bearings permanently lubricated.
- Locked bearing minimizes endplay.
