| Speed (rpm): | 2500 |
| Rated Torque (oz-in): | 8 |
| Rated Voltage: | 130VDC |
| Amps: | 0.22 |
| Motor HP: | 1/50 |
| KT (oz-in/A): | 42 |
| KE (V/krpm): | 31 |
| Winding Resistance (ohms): | 176 |
| Winding Inductance (mH): | 220 |
| Rotor Inertia (oz-in-sec²): | 0.003 |
| Radial Load (lbs): | 25 |
| Length XH (inch): | 3.31 |
| Product Type: | 24A2BEPM |
| Accessory Shaft: | NO |
STANDARD FEATURES
- Models 0042 and 0049 include a factory-installed base for foot mount.
- Totally enclosed non-ventilated (IP-40).
- External brush access for easy inspection and replacement.
- Oversized brushes for long life.
- Pre-seated graphite or copper-graphite brushes for optimum performance and quiet operation.
- Skewed armature for smooth low speed operation.
- Oversized magnets resist demagnetization, stabilized to common strength for consistent performance.
- High starting torque and self-braking.
- Noise-tested ball bearings permanently lubricated.
- Locked bearing minimizes endplay.
