| Speed (rpm): | 173/ 250 |
| Torque (oz-in): | 10/ 16 |
| Current (Amps): | 0.56/ 0.81 |
| Voltage (VDC): | 90V / 130V |
| Motor Power (HP): | 1/23 / 1/11 |
| Form Factor: | 1.4/ 1.0 |
| Gear Ratio: | 10 |
| Radial Load: | 70 |
| Length XH (inch): | 7.44 |
| Weight (lbs): | 8 |
| Connection Diagram: | 07410101 |
| Relates Products: | true |
| Product Type: | 24A4BEPM-3F/H |
| HPDecimal: | 0.0909 |
| Accessory Shaft: | NO |
STANDARD FEATURES
- 24A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating conditions.
- Performance at 130VDC is based on use with filtered controls (F.F.=1.0); ratings at 90 VDC are based on operation with an unfiltered control (F.F.=1.4).
- Gearmotors can be mounted via four tapped holes in bottom of the gearhead - or - via three tapped holes on the left or right side of the gearhead.
- Industrial lip type seals on motor and output shafts.
- Ball bearing on output shaft for increased radial load capacity and long life.
- Permanently lubricated gearing utilizing semi-fluid grease lubrication for long life.
- Bronze gear for high shock load capability.
- Hardened and ground worm for high strength and long life.
- Environmental Protection rating is IP-40 (or IP-44, with optional accessory kit model 0976 installed).